LightMySky

Atomic Absorption and Emission for Trace Metals

Break a sample into free atoms and each element absorbs or emits at wavelengths only it has. That makes atomic spectroscopy the standard route to metals at trace level, with the atom source doing most of the work.

No account needed. Progress saves in this browser.

What a learner can do afterwards

  • Explains why atomic lines are narrow while molecular bands are broad
  • Compares a flame and a plasma as atom sources on temperature and on the interferences each brings
  • Explains why a hollow cathode lamp of the same element is used as the source in absorption
  • Identifies a chemical or ionisation interference and states the usual fix

1 · Read

Free atoms are picky about light. An electron can only sit on fixed energy rungs, so it climbs only for a photon carrying exactly the gap energy and releases that same packet when it falls. Every element owns its own set of rungs, which is why atomic wavelengths work as fingerprints. Molecules are messier: they also vibrate and rotate, which smears their light into broad bands.

That sharpness is useful only if you free the atoms first, since molecules hide the fingerprint in their bands. Absorption shines a lamp through the free atoms and measures the light lost; emission heats the atoms instead and measures the light they give off. Same rungs, opposite direction.

Try it together

The lamp matters as much as the flame. Absorption uses a hollow cathode lamp built from the very element you measure, so its light matches the analyte rungs exactly. Flames are cheap atom sources but cooler and prone to chemical tangles, while a plasma runs hotter and breaks more of them apart at the price of new ionisation quirks.

Good to know

When calcium readings sag in the presence of phosphate, name the culprit: chemical interference, where phosphate locks calcium into a compound that will not atomise. Fix it with a releasing agent that frees the calcium, or move to a hotter source. If atoms ionise instead of absorbing, add an easily ionised metal to push the balance back.

Free the atoms, match the lamp to the element, and treat sagging readings as a named interference with a standard fix.

2 · Watch

Take it off screen

Print a worksheetA4 with an answer key page for grown-ups. No screen, no internet.

Where it sits

Then practise

8 questions wait behind this lesson, each with its answer explained. Every answer feeds the sky: stars light as they are learned, and dim when it is time to come back.

Spotted a problem on this page? Tell us
Atomic Absorption and Emission for Trace Metals · Science, ages 19 to 20 · LightMySky